Photo via: countrydesignstyle.com
You may also be interested in 🙂
- All of my builds are made from 100% reclaimed material. Why? Because its fun, inexpensive, challenging, and Im a tree-hugger. It just takes a little imagination and some reverse engineering. The traditional build has plans and calls for materials. My builds have materials and call for a plan. This lounge chair is one of those backward builds. I found the chaise cover in my local IKEAs salvage department a few years ago. It took a fair bit of bin digging for compatible pieces, but I found the three that make up my upholstery at a total cost of $3. Nice score, even for a black belt cheapskate like myself. I chose it from the materials stockpile recently and this chaise is what I built to fit it. This is a nice and easy one you should be able to whip up in an afternoon. Negligible finishing is involved. Lets face …
- Our upstairs hallway bath is one of the first major remodel projects I want to tackle down the road. Eventually I hope to add a shower and make it more functional as a kids bath. But for now, I changed out the mirror, and painted over the horrid gold color that was on the wall with some navy paint I actually had left over from our apartment in the city. The bathroom is pretty small, but it was also completely empty, so I decided it needed a little dresser, but since this room is used…
- Here is one more awesome material for DIY projects ! With a bit of creativity and some skills, you can repurpose old barrels , and make beautiful home accessory or piece of furniture! Coffee Table Cut the barrel into two halves and use as a coffee or a side table. The round glass can be used a
- I am not a carpenter and this was my first attempt….you may want to put some slots in the solid wood panel under your bed. This will reduce the chances of your mattress going mouldy. Or just air your mattress outside occasional. I work in a bed shop and mouldy mattresses can happen quite quickly with moisture and heat.
- Once upon a time there was a plain lampshade that sat upon a thrift store lamp in the corner of my desk. It was a perfectly fine lampshade, but just so pla
- I love this little DIY so much, and think it turned out pretty well. It is relatively easy to create, the most difficult part of this project is patience! Believe me, patience is important otherwise your tray will FALL APART the second you pick it up. You must, must, must leave it for at least a day (or two) to dry. The glue is strong, but not unless you let it cure for a few days. I had to redo the attachment process two times, so just be sure to let it dry once everything is perfectly attached, and do not attempt to lift the tray by the handles (they are decorative mostly). Another great thing is how few supplies you need to actually create this. You dont have to spend a lot of money upfront to make this DIY, I think I spent about 20-30 dollars total. If you have old drawer pulls that you can paint, or already have a strong glue or a tile, you can spend even less. So lets get to it!
- Mason jars are one of my favorite things. I’m usually a pretty frugal gal, but put me in an antique store with vintage jars, and I go a bit gaga. There are just so many things you can do with them! These are some of my favorite projects that I’ve found around the internet, rangingKeep Reading
- Saltwash is a a powder paint additive that creates a unique weathered look. Simply add Saltwash to any paint to create a mixture. Apply to any piece of furniture or surface to create an authentic time worn look as if weathered from years on the coast! Directions: Mix the Saltwash powder using the included scoop, to any paint of your choice. The Saltwash to paint ratio can be based on 20oz – 25oz of Saltwash to one quart of paint, for desired effect. This amount can be increased or decreased depending on the amount of paint you choose to use. *Comes in a beachy reusable Tin * Included: How – To-Quick Start Guide and 2 oz measuring scoop Step 1 Apply heavily all over in a “glob” like technique. You will notice the heavy Saltwash texture, this is good and will add to the look you want to achieve. When the Saltwash layer is half way dry and still tacky, wipe softly with a paint brush, using light paint strokes in a back and forth motion to slightly smooth down the Saltwash. These strokes should only lightly smooth out the Saltwash layer leaving the heavy “globbed” texture more even and only slightly smoother. If the Saltwash layer becomes to dry to smooth down, simply dampen the paint brush with water and resmooth. If you need more texture, simply reapply the Saltwash. Step 2 Once the Saltwash layer is completely dry, apply your top coat of paint. No Saltwash will be added to this topcoat of paint in this step. Reapply this topcoat of paint as desired. Step 3 Once your paint is totally dry, a light sanding to your final piece of furniture will bring out the underlayer details of the Saltwash and give it the multi layered and the “years aged on the salty coast” look and feel you want! Tips Use differing paint colors for the Saltwash coat and final coat to give contrast and really show the layers of paint. Using a higher gloss or Satin finsih for the final coat adds to an authentic look as if it was salvaged from an old beach cottage… back when oil and lead paints were used 😉 Try multiple layers of Saltwash to add more interest. A light coat of wax in a brown tone will add to an authentic vintage look.
- Whether you need more light or just attempting to create a cozy look for your home, string lights would be the prettiest way to do it. Hang string lights on walls, ceilings, fill a jar with it, a million creative ways for instant cozy mood in your home! Here is a collection of our favorite string li
- The imagination shown on this site blew me away. Great ideas for kids rooms (heck, I wouldnt mind having some of these things in my room!)
- Who lives here A professional woman Location Notting Hill, London Property An apartment on the top two floors of a Victorian building Designer Kia Sunda of Kia Designs Size 2 bedrooms, 1 bathroom White, handleless units create a sleek, streamlined feel in the kitchen. ‘The owner loves to cook and was spending a lot on appliances, so I trimmed costs by designing the kitchen and getting the builder to install it,’ says Kia. The tubular extractor looks beautifully space age.
- Hey there friends! Today I have a super easy project for you. It’s another project I made entirely from scrap wood I had in my workshop. Do you love FREE as much as I do?! I just got my first tablet on Black Friday. I know, I’m a little late to the tablet party. I …