Photo via: statigr.am
You may also be interested in 🙂
- Have you been looking for an inexpensive way to transfer an image?!? Check out this great WAX PAPER IMAGE TRANSFER tutorial. The video helps with the all the details!
- These shoes are called ‘Energetic pass, they are designed with a spring heel which has a mechanism which acts as a shock absorber, and gives the wearer a new walking experience (you can see it in the video in the end). Actually, the only way to make this structure is by 3D printing.In this instructable I will help you to understand the steps to design your 3D print shoes.For this instructable you will need: Plasticine, scan of a anatomical last, access to a 3D printer, knowledge in 3D software and to let your imagination run wild…
- How to: Vintage map window frame (mantle or wall decor). Easy to do. Look for a Rand McNally wall map poster on Amazon. I found one for $6. I dabbed with coffee and distressed with sand paper (220 grit). I found an old greenhouse frame for free. I painted it with homemade Chalk Paint and distressed it. I used a staple gun on the back to piece together. Easy and cheap!
- Beautiful burlap wreath that can be displayed any time of year. Made of teal, grey chevron print on cream, and natural burlap. Burlap is seamed on edges and will not fray. High quality wreath hand made. Initial of your choice painted cream in Rochester font. Faux jute cream bow adds the special finishing touch. Wreath measures approximately 22 in diameter. Perfect size for door or to hang inside for interior decoration. This wreath should be placed in covered area where it can be protected from sunlight and harsh outside weather. Like to send as a gift? Just let me know at checkout and I will be happy to include a special note from you! Wreath is made to order and hand made … will vary ever so slightly from picture shown. If you would like smaller size please convo me for special pricing. The wreath pictured is 22 and perfect for exterior door! Thank you
- Build this Rolling DIY Bookshelf with easy plans provided by Ana White. Then get the tips on the adjustments I made and how I obtained an old wood finish.
- Handcrafted from a mix of woods all customized to give you a sturdy bed while not sacrificing a unique look. The headboard is Reclaimed wood that has a natural worn weathered patina making it a warm and unique piece. The Base is crafted from new(sometimes recycled, but cannot consistently keep up with demand) pine/fir wood and then given a multi-step finish to get that weathered grey wash to match/blend with the old. Includes center beam for support on Full, queen, and king sizes. Includes locking slats that give extra sturdiness to the overall bed. Simple assembly required 40 headboard included, extra height on headboard can be added @ $50 per 5 Bed slats are set at 9 from the ground- but can be customized overall dimensions per size Twin- 42-43 wide, 78-79 long, base- 11 tall, headboard 40 tall Full 58 wide, 78 long, base 11 tall, headboard 40 tall Queen 64 wide, 84 long, base 11 tall, headboard 40 tall King 80 wide, 84 long, base 11 tall, headboard 40 tall CA King 76 wide, 88 long, base 11 tall, headboard 40 tall Shown in 1 picture of a turquoise slate grey customized finish in a Queen size. 3 pictures are of a weathered dark grey finish in King Bed. Made to order- any finish can be customized to fit your room decor/ tastes. You can make note on order for your desired finish, and send pictures if applicable to coordinate with existing furniture. looking for a headboard only here is the listing https://www.etsy.com/listing/449590896/the-michelle-grey-weathered-reclaimed Looking for matching/coordinating nightstands https://www.etsy.com/listing/464884606/raw-reclaimed-recycled-wood-1 You can expect around 6 weeks from order placed to delivery unless otherwise noted on shop page. I ship via fed ex and the bed comes in sections, easy to maneuver through halls/doorways/staircases, and simple assembly required.
- Saltwash is a a powder paint additive that creates a unique weathered look. Simply add Saltwash to any paint to create a mixture. Apply to any piece of furniture or surface to create an authentic time worn look as if weathered from years on the coast! Directions: Mix the Saltwash powder using the included scoop, to any paint of your choice. The Saltwash to paint ratio can be based on 20oz – 25oz of Saltwash to one quart of paint, for desired effect. This amount can be increased or decreased depending on the amount of paint you choose to use. *Comes in a beachy reusable Tin * Included: How – To-Quick Start Guide and 2 oz measuring scoop Step 1 Apply heavily all over in a “glob” like technique. You will notice the heavy Saltwash texture, this is good and will add to the look you want to achieve. When the Saltwash layer is half way dry and still tacky, wipe softly with a paint brush, using light paint strokes in a back and forth motion to slightly smooth down the Saltwash. These strokes should only lightly smooth out the Saltwash layer leaving the heavy “globbed” texture more even and only slightly smoother. If the Saltwash layer becomes to dry to smooth down, simply dampen the paint brush with water and resmooth. If you need more texture, simply reapply the Saltwash. Step 2 Once the Saltwash layer is completely dry, apply your top coat of paint. No Saltwash will be added to this topcoat of paint in this step. Reapply this topcoat of paint as desired. Step 3 Once your paint is totally dry, a light sanding to your final piece of furniture will bring out the underlayer details of the Saltwash and give it the multi layered and the “years aged on the salty coast” look and feel you want! Tips Use differing paint colors for the Saltwash coat and final coat to give contrast and really show the layers of paint. Using a higher gloss or Satin finsih for the final coat adds to an authentic look as if it was salvaged from an old beach cottage… back when oil and lead paints were used 😉 Try multiple layers of Saltwash to add more interest. A light coat of wax in a brown tone will add to an authentic vintage look.
- Do you or a family-member or friend have a wine-themed kitchen or bar that needs that extra something? This cork wine bottle wall hanging is for you! Each bottle measures approximately 12.5 inches tall by 3.5 inches wide (decorative leaves extend to about 5 inches wide), with a depth of approximately 1 inch. They are 100% handmade via an intricate process of cutting, drilling, wiring, pinning, and gluing a variety of recycled wine corks. Bottles are backed with a layer of cork and wired. Naturally lightweight, they are a breeze to get right up on the wall and enjoy! The bottle is adorned with a bunch of grapes made from the natural red color of sliced ends of red wine corks. Two leaves made from sheets of cork and two floral wire coils accent the grapes. When ordering, select top, right, or left placement for the grapes. Bottles with grapes at the right and left may or may not include a ribbon at the neck of the bottle. If you would like a ribbon, choose the option right with ribbon or left with ribbon. If you do not, choose right without ribbon or left without ribbon. (Currently silver ribbon is used on this item. If you would like a different color, please e-mail the shop owner for availability.) Lightweight and a great conversation piece, these bottle wall hangings display beautifully in groups of two or three in a kitchen or bar area. Perfect for wine lovers and wine-themed spaces
- ♥ DIY Cat Stuff ♥ DIY cat tree made from an old wooden ladder, outdoor carpeting, left over wood and jute wrapped around the bottom for a scratching post. Hammock is just material and a towel. Super fun, cheap and easy to make!
- Kellie Smith, creator of Velvet Finishes, shows just how easy it is to paint furniture! Velvet Finishes is a NO sand, NO wax, NO chalk, EASY to use furniture…
- Turn Anything Into Barnwood With Chalk Paint and Dark Wax. Barnwood Is So Popular Right Now. Learn How To Get The Look Easy.
- I love this little DIY so much, and think it turned out pretty well. It is relatively easy to create, the most difficult part of this project is patience! Believe me, patience is important otherwise your tray will FALL APART the second you pick it up. You must, must, must leave it for at least a day (or two) to dry. The glue is strong, but not unless you let it cure for a few days. I had to redo the attachment process two times, so just be sure to let it dry once everything is perfectly attached, and do not attempt to lift the tray by the handles (they are decorative mostly). Another great thing is how few supplies you need to actually create this. You dont have to spend a lot of money upfront to make this DIY, I think I spent about 20-30 dollars total. If you have old drawer pulls that you can paint, or already have a strong glue or a tile, you can spend even less. So lets get to it!